Mode, The view device info menu – Xantrex Technology XW User Manual
Page 80
Configuration
3–30
975-0307-01-01
Manual Off Mode
Selecting Manual Off Mode overrides the automatic stop settings and
manually stops the generator. Manual Off must be selected to stop the
generator when the generator has been started manually. The XW Auto
Generator Start will not automatically start the generator again until
“Automatic” is selected in the GenMode Menu.
Mode
The Mode menu item is a device operating mode and provides the means
to put the XW Auto Generator Start in Standby Mode or return it from to
Operating Mode.
The AGS Mode must be set to [Standby] before selecting a generator
type. Selecting Standby stops the generator (if it is running).
While in Standby, the XW Auto Generator Start “listens” to and reports
its status to the network. It will not start the generator manual or
automatically while in Standby.
The View Device Info Menu
The View Device Info menu provides a means to view the Fault, Warning
and Event logs. It is also where the settings can be restored to factory
default settings.
View Fault Log
Purpose
The Fault Log displays the last 20 XW Auto Generator Start faults for
reference to assist the user in troubleshooting problems.
When to use
Consult the Fault Log when troubleshooting or before seeking technical
assistance.
View Warning Log
Purpose
The Warning Log displays the last 20 XW Auto Generator Start warnings
for reference.
When to use
Consult the Warning Log when troubleshooting or before seeking
technical assistance.
Important:
The GenMode mode must be set to Manual Off before any start
trigger parameters can be changed.