User settings – Xantrex Technology XW User Manual
Page 82
Configuration
3–32
975-0307-01-01
User Settings
Use this table to record any customized XW Auto Generator Start settings
for future reference.
Table 3-3 Generator Configuration Settings, Values, Defaults, and User Settings
Setting
Values
Default
User
Setting
Main Menu Items:
GenMode
ManualOn, ManualOff, Automatic
ManualOff
Mode
Operating/Standby
Operating
Configuration Menu Items:
“QT En”
Enabled, Off
Enabled
“QT Begin”
12:00AM–11:59PM (12-hour clock)
00:00–23:59 (24-hour clock)
9:00PM (12-hour clock)
21:00 (24-hour clock)
“QT End”
12:00AM–11:59PM (12-hour clock)
00:00–23:59 (24-hour clock)
8:00AM (12-hour clock)
8:00 (24-hour clock)
“Gen Type”
Type 1 to Type 13
Type 2
Triggers Menu Items:
“Start DCV 30 sec”
Disabled, 4.0 V–65.0 V
44.0 V
“Start DCV 15 min”
Disabled, 4.0 V–65.0 V
Disabled
“Start DCV 2 hr”
Disabled, 4.0 V–65.0 V
Disabled
“Start DCV 24 hr”
Disabled, 4.0 V–65.0 V
Disabled
“Stop Float”
Enabled, Disabled
Disabled
“Stop Absorb”
Enabled, Disabled
Enabled
“Stop V”
Disabled, 4.0 V–65.0 V
Disabled
“Temp1”
Enabled, Disabled
Disabled
“Temp2”
Enabled, Disabled
Disabled
“Load”
Enabled, Disabled
Disabled
“Start Load”
10.0 A–33.0 A
10.0 A
“Stop Load”
7.0 A–28.0 A
7.0 A