Zoom MRS-1044 - Manual (Page 101)

ZOOM MRS-1044
101
Appendices
Effect type/parameter list
-12 – 12
-12 – 12
-12 – 12
1 – 8
Boosts/cuts the high-frequency range.
Boosts/cuts the mid-frequency range.
Boosts/cuts the low-frequency range.
Sets the output level of the module.
HIGH
HIGH 1
HIGH 2
MID
MID 1
MID 2
LOW
LOW 1
LOW 2
LEVEL
LEVEL 1
LEVEL 2
SINGLE
DUAL ( Lch )
DUAL ( Rch )
SINGLE
DUAL ( Lch )
DUAL ( Rch )
SINGLE
DUAL ( Lch )
DUAL ( Rch )
SINGLE
DUAL ( Lch )
DUAL ( Rch )
PARAMETER 1 PARAMETER 2 PARAMETER 3 PARAMETER 4 PARAMETER 5 PARAMETER 6 TYPE
3BandEQ (*1)
3BandEQ (*2)
MID
MID 1
HIGH
HIGH 1
LOW
LOW 1
LEVEL
LEVEL 1
--
HIGH 2
--
MID 2
PARAMETER 7
--
LOW 2
PARAMETER 8
--
LEVEL 2
EQ MODULE
THRSHOLD
THRSH 1
THRSH 2
SINGLE
DUAL ( Lch )
DUAL ( Rch )
THRSHOLD
THRSH 1
PARAMETER 1 PARAMETER 2 TYPE
ZNR (*1)
ZNR (*2)
--
THRSH 2
ZNR MODULE
You can use an expression pedal to control the volume.
PARAMETER 1 TYPE
VOL PDL MIN VOL
VOL PDL MODULE
*1: When a SINGLE type effect is selected for the COMP/LIM module
*2: When a DUAL type effect is selected for the COMP/LIM module
1 – 6
0 – 10
1 – 8
0 – 10
Specifies the response of the mic pre-amp.
Adjusts the tone.
Sets the output level of the module.
Specifies the amount by which vocal sibilants will be cut.
1. Flat response 2. Low-cut response curve.
3. Response curve for acoustic guitar. 4. Low-cut response curve for acoustic guitar.
5. Response curve for vocal.
6. Low-cut response curve for vocal.
Range Explanation of parameter Parameter name
Range Explanation of parameter Parameter name
Range Explanation of parameter Parameter name
COLOR
COLOR 1
COLOR 2
TONE
TONE 1
TONE 2
LEVEL
LEVEL 1
LEVEL 2
DE-ESSER
SINGLE
DUAL ( Lch )
DUAL ( Rch )
SINGLE
DUAL ( Lch )
DUAL ( Rch )
SINGLE
DUAL ( Lch )
DUAL ( Rch )
SINGLE
Explanation of MIC PRE MODULE parameters
Explanation of EQ MODULE parameters
Explanation of ZNR MODULE parameters
Three-band equalizer.
Three-band equalizer.
Zoom's proprietary noise reduction that minimizes noise when you are not playing.
Zoom's proprietary noise reduction that minimizes noise when you are not playing.
*1: When a SINGLE type effect is selected for the COMP/LIM module
*2: When a DUAL type effect is selected for the COMP/LIM module
*For an explanation of the parameters, refer to the GUITAR/BASS algorithm.
OFF,1 – 30
Adjusts the sensitivity of ZNR. For best results, set this as high
as possible without allowing the attacks or decays to sound
unnatural.