Zoom MRS-1044 - Manual (Page 36)

• BOUxx-yy: A V-take recorded using the Bounce
function
* xx will be the track number (1 – 10), and yy will be the V-
take number (1 – 10).
If an unrecorded V-take is selected, the V-take name area
will indicate "NO DATA."
4. When you have finished switching V-takes, press
the [EXIT] key.
The [V-TAKE] key will go dark, and you will return to the
main screen.
A V-take that has been recorded will be automatically
assigned a default name, but you can edit this V-take name
as follows.
1. In the main screen, press the [V-TAKE] key.
A screen will appear in which you can switch the V-take of
each track.
2. Use the cursor [ E ]/[ R ] keys and the dial (or the
status keys) to select the track (1 – 10) for which
you want to edit the name of a V-take.
For details on how to select a track, refer to p.35.
• It is not possible to edit the name of an unrecorded V-
take (NO DATA).
• The V-take name can be edited only for the V-take that is
currently selected for each track 1 – 10.
3. Press the [EDIT] key.
The first character of the V-take name will blink.
4. Use the cursor [ E ]/[ R ] keys to move the blinking
location, and turn the dial to change the character.
The following characters can be selected.
Numerals: 0 – 9
Letters: A – Z, a – z
Symbols: (space) ! ” # $ % & ’ ( ) + , - . / : ; < =
> ? @ [ \ ] ^ _ { } ˜
5. When you have finished inputting the name, press
the [EXIT] key.
The name will be updated, and you will return to the screen
of step 2. If necessary, you can now edit the V-take name of
another track.
6. When you have finished editing, press the [EXIT]
key.
You will return to the main screen.
If all recorded data is erased from a V-take, the name will
revert to "NO DATA."
H INT
H INT
Editing the name of a V-take
H INT
ZOOM MRS-1044
36
Refer
e
nce
[Recor
d
er]
Using V-takes