Zoom MRS-1044 - Manual (Page 78)

• When recording on one mono track (track 1 – 6)
If no recording track is selected, the output signal of the
insert effect will be sent to a location immediately before
the MASTER fader, and mixed with the signals of the track
mixer.
■ When inserted into the track mixer
• If two mono channels (channels 1/2, 3/4, 5/6), a stereo
channel (7/8, 9/10), or the DRUM channel is selected as
the insert location
• If a mono channel (channel 1 – 6) or the BASS channel
is selected as the insert location
■ When inserted immediately before the MASTER
fader
The effect modules of the insert effect have various "effect
parameters" that can be adjusted to make detailed changes
to the character of the effect. By editing the effect
parameters, you can obtain the desired tone or effect.
For some effect modules, you can change the "effect type."
For example in the GUITAR/BASS algorithm, the
MODULATION/DELAY effect module provides twelve
effect types such as chorus, flanger, and phaser, and you
can select and use any one of these. When you change the
effect type, the effect parameters will also change.
Editing the insert effect patch
OUTPUT
L
R
L
R
L
R
L
R
MASTER fade
EFFECT
( M → S )
EFFECT
( S → S )
Recorder
Track
Track mixer
Channel
Recorder
Track
Track mixer
Channel
EFFECT
( M → S )
EFFECT
( S → S )
Recorder
Track
Track
Recorder
Track
Track
Track mixer
Channel
Channel
Track mixer
Channel
Channel
EFFECT
( M → S )
EFFECT
( S → S )
H INT
INPUT 1
or
INPUT 2
INPUT 1
or
INPUT 2
INPUT 1
INPUT 2
INPUT 1
INPUT 2
Recorder
Track
Recorder
Track
Recorder
Track
Recorder
Track
EFFECT
( M → S )
EFFECT
( S → S )
EFFECT
( M → S )
EFFECT
( S → S )
ZOOM MRS-1044
78
Refer
e
nce
[Ef
fects]
Using the insert effect