Zoom MRS-1044 - Manual (Page 30)

• Mark number 00 is already set at the beginning of the
song (the counter zero location).
• In the main screen, the MARKER area in the upper right
of the display will show the number of the mark that you
passed last (i.e., the previous mark in the song). If a dot
is shown at the lower right of the mark number, this
means that the mark location matches the current
location.
Here's how to move to the location of a mark. This can be
done in two ways: you can use key operations, or specify
the mark number directly.
■ Using keys to locate
1.
Press either the MARKER [ U ] or [ I ] key.
Each time you press the key, you will locate to the next
mark before or after the current location.
■ Specifying the mark number to locate
1.
In the main screen, press the cursor [ E ] key once.
The word MARKER will blink in the upper right of the
display.
2. Turn the dial to select the desired mark number.
As soon as the number is changed, you will locate to that
number.
Here's how to delete a mark that you assigned.
1. Locate to the mark that you want to delete.
The mark number displayed in the MARKER area is the
mark that will be deleted. However, it is not possible to
delete a mark unless the mark location exactly matches the
current location. Make sure that the dot at the lower right
of the mark number is lit.
2. Press the [CLEAR] key.
The selected mark will be deleted, and subsequent marks
will be renumbered.
• A deleted mark cannot be recovered.
• It is not possible to delete mark number "00" located at
the beginning of the song.
N OTE
Deleting a mark
Current location
Song
Mark
Locating to a mark location
H INT
Add a mark
Mark number
Song
Mark number
Song
ZOOM MRS-1044
30
Refer
e
nce
[Recor
d
er]
Assigning marks within the song (Marker function)