Reference [other, Changing the function of the foot switch, Using the tuner – Zoom MRS-1044 User Manual
Page 92
Changing the function of the
foot switch
With the default settings of the MRS-1044, a separately
sold foot switch (ZOOM FS01) connected to the [FOOT
SW] jack can be used to play/stop the MRS-1044. If you
want to use the foot switch to perform manual punch-in/out
recording (
→ p.33), use the following procedure to change
the internal setting.
1.
In the main screen, press the [PROJECT/UTILITY]
key.
The display will indicate "PROJECT."
2.
Use the cursor [
E
]/[
R
] keys to make the display
read "UTILITY SYSTEM," and press the [ENTER]
key.
3.
Use the cursor [
E
]/[
R
] keys to make the display
read "UTILITY FOOT SW," and press the [ENTER]
key.
The function currently assigned to the foot switch will be
displayed.
• PLY_STP: The MRS-1044 will alternate between
play/stop each time you press the foot switch (default
setting).
• PUNCH IO: The foot switch can be used to perform
manual punch-in/out.
4.
Use the dial to select either "PLY_STP" or "PUNCH
IO."
5.
To return to the main screen, press the [EXIT] key
several times.
Using the tuner
The MRS-1044 has a built-in chromatic tuner that can be
used when tuning an instrument (e.g., guitar or bass)
connected to the [INPUT 1/2] jacks. Here's how to use the
tuner.
1.
Connect the instrument that you want to tune to
the [INPUT 1/2] jack, and turn on the [ON/OFF] key
for the jack to which you connected it.
2.
In the main screen, press the [EFFECT] key, and
then press one of the lit ALGORITHM keys.
The patch currently selected for the insert effect will be
displayed.
It is not possible to use the tuner from a screen that shows
a send/return effect patch.
3.
Press the [BYPASS/TUNER] key.
The display will alternately show "INSERT BYPASS" and
"TUNER
→ENTER." During this time, the insert effect
will be bypassed.
4.
Press the [ENTER] key.
The display will indicate "TUNER," and the tuner function
will be turned on. While the tuner function is on, the insert
effect will remain bypassed, and the send/return effects
(reverb and chorus/delay) will also be turned off.
5.
Play the note that you want to tune, and tune your
instrument so that the desired note name (C, C#, D,
D#, E...) appears in the display.
Note name
N
OTE
ZOOM MRS-1044
92
Refer
e
nce
[Other]
Reference [Other]
This section explains how to use functions such as the MRS-1044's built-in tuner, and how to change the function of the foot
switch.