Zoom MRS-1044 - Manual (Page 81)

• Patches that you store are saved on the hard disk as part
of the project.
• Patch data included in an already existing project can be
loaded into the current project ( → p.84). This is
convenient when you want to use an edited patch in a
different project.
Here's how to edit the name of the currently selected patch.
1. Press the [EFFECT] key, and then press the [EDIT]
key.
The currently selected patch can now be edited.
2. Press the [TOTAL] key, and use the cursor [ Q ]/[ W ]
keys to make the display read "PAT NAM."
The name of the patch will be displayed below "PAT
NAM," and the character currently selected for editing will
blink.
3. Use the cursor [ E ]/[ R ] keys to move the blinking
area, and turn the dial to change the character.
For details on the characters that can be selected, refer to
p.36.
4. When you have finished editing the name, use the
cursor [ Q ]/[ W ] keys to make the display read
"STORE," and press the [ENTER] key three times.
The patch will be stored with the edited name, and you will
return to the patch select screen.
Using the send/return effects
This section explains how to select and edit patches for the
send/return effects (reverb, chorus/delay)
The "reverb" and "chorus/delay" send/return effects are
separate and independent.
Reverb and chorus/delay each have an "effect type" that
determines the type of effect, and various parameters that
let you adjust the character of the effect. Settings for the
effect type and parameters, together with a name, are
collectively called send/return effect "patches."
A newly created project contains 20 different reverb
patches and 20 different chorus/delay patches. You can
instantly switch reverb or chorus/delay settings simply by
choosing the effect for which you want to select a patch
(reverb or chorus/delay), and then selecting a patch.
Here's how to select a reverb or chorus/delay patch.
1. Press the [EFFECT] key, and then press the
[REVERB] key or [CHORUS/DELAY] key.
Press the [REVERB] key if you want to select a reverb
patch, or the [CHORUS/DELAY] key if you want to select
a chorus/delay patch. The currently selected patch will be
displayed. The following display shows an example of
what you see when the [REVERB] key is pressed.
2. Turn the dial to select the new patch.
As you turn the dial, new patches will be recalled
immediately. If the track mixer REVERB SEND and
CHORUS/DELAY SEND parameter settings are raised,
you can press the PLAY [ R ] key to play back the song,
and listen to the result of the newly selected patch.
Selecting a send/return effect patch
REVERB
CHORUS/DELAY
00 – 19 20 types
20 types 00 – 19
Algorithm Patch number Types
About the send/return effect patches
Editing the name of an insert effect
patch
H INT
ZOOM MRS-1044
81
Refer
e
nce
[Ef
fects]
Using the send/return effects