Zoom MRS-1044 - Manual (Page 28)

The insert effect can also be inserted into any desired
channel of the mixer, to process the signal of the rhythm
section. For details refer to p.76.
Press the [EXIT] key.
You will return to the main screen.
Press the [EFFECT] key, and then press the
[MASTERING] key.
The MASTERING algorithm will be selected for the insert
effect.
Turn the dial to select a patch.
For this example, select patch number 07 "WarmMst"
Press the PLAY [ R] key to play back the song.
The entire song will pass through the insert effect and be
sent from the [OUTPUT] jacks. If desired, you can edit the
currently selected patch to make detailed adjustments to the
way in which the effect is applied ( → p.78).
When you have finished selecting the patch, press
the [EXIT] key.
You will return to the main screen.
Finally, you will record (mix down) the completed song
onto an external master recorder.
Press the PLAY [ R] key to play back the song, and
while you watch the level meter, adjust the overall
volume of the song as desired.
Adjust the MASTER fader while making sure that the 0 dB
dot of the L/R level meter does not light
When you have finished adjusting the MASTER
fader, press the STOP [ P] key to stop, and then
press the ZERO [ U] key to return to the beginning
of the song.
Start recording on the external recorder connected
to the [OUTPUT] jack(s), and then press the PLAY
[ R] key of the MRS-1044.
When you have finished recording, stop the
external recorder. Press the MRS-1044's STOP [ P]
key to stop the song.
This completes the mixdown. Don't forget to save the
current project on the hard disk.
When shipped from the factory, the hard disk contains a
project with a completed mix of all recorded tracks. (Project
name "Sample 4," project number 995.) For details on how
to load a project, refer to p.17.
On the MRS-1044, the current project will be saved
automatically when you turn off the power or load another
project. For this reason, if you modify the mix after having
saved the project with its "completed" mix, you will be
unable to return to the original "completed" mix. To make
sure that you have preserved the completed mix, we
recommend that you either Protect that project (
→ p.85) or
save the current mixer settings as a "scene"
( → p.51).
N OTE
H INT
4
3
2
0dB
1
4-4: Perform the mixdown
7
6
5
4
Select a patch for the insert effect
3
H INT
ZOOM MRS-1044
28
Intr
oductory
tour
Step 4: Mixdown