Zoom MRS-1044 - Manual (Page 44)

A menu will appear in which you can edit recorded data in
units of entire tracks.
3. Repeatedly press the [PROJECT/UTILITY] key to
make the display indicate "EXCHG TRxx-yy."
In "EXCGH TRxx-yy," the xx and yy values respectively
indicate the track number and V-take number that will be
exchanged with another track/V-take.
4. Use the cursor [ E ]/[ R ] keys and the dial to
specify the track/V-take that you want to
exchange, and press the [ENTER] key.
A screen will appear in which you can specify the other
track/V-take with which the first will be exchanged. In
"ExchgTo TRxx-yy," the xx and yy values respectively
indicate the track number and V-take number.
In this screen, the lit/unlit state of the dots in the level meter
will indicate whether the currently specified V-take has
already been recorded. For details refer to p.40.
5. Use the cursor [ E ]/[ R ] keys and the dial to
specify the other track/V-take for the exchange,
and press the [ENTER] key.
The display will indicate "EXCHG SURE?", asking you to
confirm the Exchange operation.
6. Press the [ENTER] key to execute the Exchange
operation, or press the [EXIT] key to cancel.
When you press the [ENTER] key and the Exchange
operation has been completed, you will return to the screen
from step 1.
If you press the [EXIT] key, you will return to the screen
from step 4. If necessary, you can press the [EXIT] key to
step back through each screen.
Capturing the recorded contents
of a track
The MRS-1044 lets you capture the recorded data of a
desired track, and temporarily store it on the hard disk. The
captured data can be swapped (exchanged) with a current
track when needed.
For example if you capture a track before performing
punch-in/out recording on that track, you can repeat the
Swap operation to compare its original state with the
results of punch-in/out recording.
Here's how to select and capture a desired track.
1. In the main screen, press the [UNDO/REDO] key.
A screen will appear in which you can select the track to be
captured.
Capturing a track
◆ Capture
◆ Swap
Recorded data
Re-recorded region
Data captured from track 1
Data captured from track 1
Recorder
Track 1
Capture
track 1
Capture
track 1
Capture
track 1
Track 2
Track 3
Recorder
Track 1
Track 2
Track 3
Recorder
Track 1
Track 2
Track 3
H INT
ZOOM MRS-1044
44
Refer
e
nce
[Recor
d
er]
Track editing