Zoom MRS-1044 - Manual (Page 2)

SAFETY PRECAUTIONS
In this manual, symbols are used to highlight warnings and
cautions for you to read so that accidents can be prevented.
The meanings of these symbols are as follows:
Please observe the following safety tips and precautions to
ensure hazard-free use of the MRS-1044
• Power requirements
The MRS-1044 is powered by the supplied AC
adapter. To prevent malfunction and safety hazards,
do not use any other kind of AC adapter.
When using the MRS-1044 in an area with a
different line voltage, please consult your local
ZOOM distributor about acquiring a proper AC
adapter.
• Environment
Avoid using your MRS-1044 in environments where
it will be exposed to:
• Extreme temperature
• High humidity or moisture
• Excessive dust or sand
• Excessive vibration or shock
• Handling
The MRS-1044 is a precision instrument. Do not
exert undue pressure on the keys and other controls.
Also take care not to drop the unit, and do not subject
it to shock or excessive pressure.
• Alterations
Never open the case of the MRS-1044 or attempt to
modify the product in any way since this can result in
damage to the unit.
• Connecting cables and input and output jacks
You should always turn off the power to the MRS-
1044 and all other equipment before connecting or
disconnecting any cables. Also make sure to
disconnect all cables and the AC adapter before
moving the MRS-1044
Usage Precautions
• Electrical interference
For safety considerations, the MRS-1044 has been
designed to provide maximum protection against the
emission of electromagnetic radiation from inside the
device, and protection from external interference. However,
equipment that is very susceptible to interference or that
emits powerful electromagnetic waves should not be placed
near the MRS-1044, as the possibility of interference
cannot be ruled out entirely.
With any type of digital control device, the MRS-1044
included, electromagnetic interference can cause
malfunctioning and can corrupt or destroy data. Care
should be taken to minimize the risk of damage.
• Cleaning
Use a soft, dry cloth to clean the MRS-1044. If necessary,
slightly moisten the cloth. Do not use abrasive cleanser,
wax, or solvents (such as paint thinner or cleaning alcohol),
since these may dull the finish or damage the surface.
Please keep this manual in a convenient place for
future reference.
ZOOM MRS-1044
2
USAGE
AND
S
AFETY
PRECAUTIONS
USAGE AND SAFETY PRECAUTIONS
This symbol indicates explanations
about extremely dangerous matters. If
users ignore this symbol and handle the
device the wrong way, serious injury or
death could result.
This symbol indicates explanations
about dangerous matters. If users
ignore this symbol and handle the
device the wrong way, bodily injury and
damage to the equipment could result.
Warning
Caution
Warning
Caution
Caution
Caution
Caution