Zoom MRS-1044 - Manual (Page 88)

song
• Deleting or saving the project
• Saving/deleting scenes, making marker settings, etc.
A project for which the Protect setting is turned on is
indicated by a symbol displayed at the left of the project
number in the main screen.
• If you save the project after completing the mix, it will be
impossible to return to that state if you continue making
changes. If you do not want a completed mix to be
changed further, we recommend that you turn Protect on.
• The Protect setting will be stored on the internal hard
disk as soon as you switch the setting on or off.
This operation stores the currently loaded project on the
hard disk. To store the project, press the [ENTER] key
when the following screen is displayed.
When the project has been stored, you will return to the
"PROJECT STORE" screen.
The currently loaded project will be stored automatically
when you load another project, when you create a new
project, or when you press the [POWER] switch to turn off
the power.
If the AC adaptor is pulled out of the outlet and power to
the MRS-1044 is lost, all changes that occurred since the
project was last stored will be lost. This is also true of any
other miscellaneous power failure. As a precaution against
such occurrences, we recommend that you store the
project periodically.
N OTE
H INT
Storing a project (PROJECT STORE)
H INT
ZOOM MRS-1044
88
Refer
e
nce
[Pr
oject]
Project operations