Zoom MRS-1044 - Manual (Page 102)

ZOOM MRS-1044
102
Appendices
Effect type/parameter list
0 – 10
1 – 10
TYPE = FLANGER : -10 – 10
TYPE = DELAY : 0 – 10
TYPE = DELAY : 1 – 50
TYPE = DOUBLE : 1 – 100
1 – 100
0 – 10
0 – 30
LowBoost
SIZE
FB
TIME
TIME 1
TIME 2
TONE
TONE 1
TONE 2
MIX
MIX 1
MIX 2
SINGLE
SINGLE
SINGLE
SINGLE
DUAL ( Lch )
DUAL ( Rch )
SINGLE
DUAL ( Lch )
DUAL ( Rch )
SINGLE
DUAL ( Lch )
DUAL ( Rch )
0 – 10
-12.0 – 24.0
0 – 30
1 – 5
CLIP
SHIFT
BALANCE
FREQ
SINGLE
SINGLE
SINGLE
SINGLE
0 – 10
1 – 30
1 – 4
Specifies the depth of the effect.
Specifies the speed of the effect.
Modifies the type of phase tone.
Emphasizes the effect.
Specifies the amount of pitch shift produced by the pitch shifter.
Adjusts the balance between the direct sound and effect sound.
Specifies the frequency.
Emphasizes the low range.
Specifies the spatial width.
Adjusts the amount of feedback.
Sets the delay time. ( x 10 mSec )
Sets the delay time. ( x 1 mSec )
Sets the delay time. ( x 1 mSec )
Adjusts the tone.
Adjusts the mix amount of the effect.
DEPTH
RATE
COLOR
SINGLE
SINGLE
SINGLE
DEPTH
DEPTH
RATE
DEPTH
SHIFT
RATE
FREQ
SIZE
TIME
TIME
TIME 1
PARAMETER 1 PARAMETER 2 PARAMETER 3 PARAMETER 4 PARAMETER 5 PARAMETER 6 TYPE
CHORUS
FLANGER
PHASER
TREMOLO
PITCH
RingMod
EXCITER
AIR
DELAY
DOUBLE (*1)
DOUBLE (*2)
RATE
RATE
COLOR
RATE
TONE
BALANCE
DEPTH
TONE
FB
TONE
TONE 1
MIX
FB
--
CLIP
BALANCE
--
LowBoost
MIX
MIX
MIX
MIX 1
--
--
--
--
--
--
--
--
--
--
TIME 2
--
--
--
--
--
--
--
--
--
--
TONE 2
--
--
--
--
--
--
--
--
--
--
MIX 2
MODULATION/DELAY MODULE
Range Explanation of parameter Parameter name
Explanation of MODULATION/DELAY MODULE parameters
Stereo chorus with clear sound and great spaciousness.
An effect that adds a pronounced character and modulation to the sound.
An effect that adds a swooshing modulation to the sound.
An effect that cyclically varies the volume.
An effect that modifies the pitch of the original sound.
An effect that produces a metallic resonance.
An effect that gives the sound more focus and spatial definition.
Simulates the effect of air on the room resonance, giving the sound spatial depth.
A delay effect with a maximum of 500 mSec.
A doubling effect that allows the delay time to be set in 1 mSec steps up to 100 mSec.
A doubling effect that allows the delay time to be set in 1 mSec steps up to 100 mSec.
*1: When a SINGLE type effect is selected for the COMP/LIM module
*2: When a DUAL type effect is selected for the COMP/LIM module (usable only with DOUBLE)
■ LINE ALGORITHM
A stereo input/output compressor.
A stereo input/output limiter.
PARAMETER 1 PARAMETER 2 PARAMETER 3 TYPE
COMP
LIMITER
ATTACK
RELEASE
SENS
THRSHOLD
LEVEL
LEVEL
COMP/LIM MODULE
0 – 15
0 – 15
1 – 8
0 – 15
0 – 15
Specifies the input sensitivity of compression.
Adjusts the speed at which compression is applied.
Specifies the output level of the module.
Specifies the sensitivity at which the limiter will begin to apply.
Specifies the time from when the input signal falls below the threshold until compression ends. SENS
ATTACK
LEVEL
THRSHOLD
RELEASE
An effect that divides the signal into three frequency bands, and lets you specify the mix amount.
PARAMETER 1 PARAMETER 2 PARAMETER 3 PARAMETER 4 PARAMETER 5 TYPE
ISOLATOR
XOVER_Lo XOVER_Hi MIX_HIGH MIX_MID MIX_LOW
ISOLATOR MODULE
Range Explanation of parameter Parameter name
Explanation of COMP/LIM MODULE parameters
50 – 16000
50 – 16000
OFF, -24 – 6
OFF, -24 – 6
OFF, -24 – 6
Specifies the frequency at which the Lo/Mid bands will be divided.
Specifies the frequency at which the Mid/Hi bands will be divided.
Specifies the mix amount of the high range.
Specifies the mix amount of the mid range.
Specifies the mix amount of the low range. XOVER_Lo
XOVER_Hi
MIX_HIGH
MIX_MID
MIX_LOW
Range Explanation of parameter Parameter name
Explanation of ISOLATOR MODULE parameters