Zoom MRS-1044 - Manual (Page 14)

ZOOM MRS-1044
14
Connections
Connections
Connect your instruments, audio devices, and MIDI devices as shown in the following diagram.
R L
R
MIDI IN MIDI OUT
L AC adaptor
Synthesizer or sampler, etc.
CD player, etc.
Dynamic
or condenser mics
Guitar Bass
Audio system
(audio components or
amplified speakers)
Foot switch
(ZOOM FS01)
Digital recorder
(e.g., DAT recorder or
MD recorder)
MIDI sequencer
(e.g., computer)
Expression pedal
(ZOOM FP01/FP02)
Headphones
MIDI interface
To prevent damage to the speakers of your audio
system, tur n off the power of the audio system
connected to the [OUTPUT] (MASTER) jacks (or turn the
volume all the way down) before you make connections.
N OTE
When connecting stereo output devices such as a
synthesizer or CD player, connect the L output of
the external device to the [INPUT 1] jack, and the
R output to the [INPUT 2] jack.
H INT
Loop the cable of the AC adaptor around the hook as
shown in the diagram before connecting it to the [DC 12V]
jack. This will prevent the plug from being pulled out if the
AC adaptor cable is accidentally pulled.
H INT