Zoom MRS-1044 - Manual (Page 27)

Turn the dial to select a patch.
For this example, select the patch named "BrgtRoom"
(number 01).
When you have finished selecting the patch, press
the [EXIT] key.
You will return to the main screen.
In the TRACK PARAMETER section, press the
[CHORUS/DELAY SEND] key or the [REVERB
SEND] key.
Press the [REVERB SEND] key if you want to adjust the
reverb send level, or the [CHORUS/DELAY SEND] key if
you want to adjust the chorus/delay send level. A screen
will appear in which you can adjust the send level of the
selected effect. The screen shown below is an example of
when the [REVERB SEND] key is pressed.
Press the status key of the channel (DRUM, BASS,
1 – 6, 7/8, 9/10) whose send level you want to
adjust.
The send level value of the selected channel will be
displayed.
Press the PLAY [ R] key, and while the song plays
back, turn the dial to adjust the send level value.
The send level can be adjusted in a range of 0 – 100. As the
value is increased, the effect will be applied more deeply to
the selected channel.
Adjust the send level of other channels in the same
way as in steps 6 – 7.
When you have finished making settings, press the
[EXIT] key.
You will return to the main screen.
You can place the insert effect immediately before the
MASTER fader, and use one of the MASTERING
algorithm patches to modify the dynamics or tone of the
entire song. Here's how you can use this method to apply
an insert effect to the entire song.
In the main screen, press the [INPUT SOURCE] key
(located in the effect section).
The [INPUT SOURCE] key will blink, and the display will
indicate "TRACK INPUT." This means that the insert
effect is inserted into the input mixer (the mixer section
that processes the input signal).
Turn the dial to make the display read "TRACK
MASTER."
Now the insert effect is inserted immediately before the
MASTER fader, and can process the signal of the entire
song that is sent from the [OUTPUT] jack.
OUTPUT
MASTER
INSERT
EFFECT
DRUM BASS 1 2 3 4 5 6 7/8 9/10
2
1
Change the insert location of the insert effect
4-3: Apply an insert effect to the
entire song
9
8
7
6
Send level value
5
Adjust the send level
4
3
S/R-REV: Reverb
S/R-CHO: Chorus / Delay
Patch name Patch number
ZOOM MRS-1044
27
Intr
oductory
tour
Step 4: Mixdown