Zoom MRS-1044 - Manual (Page 54)

S w i t c h i n g t h e l e v e l m e t e r
display type
With the MRS-1044's default settings, the level meters
displayed in the center of the screen will indicate the level
of the signals that have passed through the [REC LEVEL]
controls/faders (post-fader). If necessary, however, you can
switch the meters so that they indicate the level of the
signals before they pass through the [REC LEVEL]
controls/faders (pre-fader).
1. In the main screen, press the [PROJECT/UTILITY]
key.
The display will indicate "PROJECT."
2. Use the cursor [ E ]/[ R ] keys to make the display
read "UTILITY SYSTEM," and press the [ENTER]
key.
3. Use the cursor [ E ]/[ R ] keys to make the display
read "UTILITY LVL MET," and press the [ENTER]
key.
4. Turn the dial to change the setting to "PRE" (pre-
fader).
To return the setting to post-fader, select "POST."
5. Press the [EXIT] key several times.
You will return to the main screen.
ZOOM MRS-1044
54
Refer
e
nce
[Mixer]
Switching the level meter display type