Turn off the power, Caution – Zoom MRS-1044 User Manual

Page 16

Advertising
background image

4.

If you want to adjust the volume of the individual

tracks, use faders 1 – 6, 7/8, and 9/10. If you want

to adjust the volume of the entire song, use the

MASTER fader.

Immediately after the demo song (project) has been loaded,

the volume of each track and the overall volume of the

entire song will be set automatically, without regard to the

current physical positions of the faders. When you operate

a fader, the volume will immediately be set to the new

position of the fader.

For a project that uses the rhythm section, use the DRUM

fader to adjust the volume of the drum sound, and the

BASS fader to adjust the volume of the bass sound.

5.

To stop the demo song, press the STOP [

P]key.

While stopped, you can press the ZERO [

U] key to move to

the beginning of the song. Or you can press the REW [

T]

key / FF [

Y] key to rewind/fast-forward in steps of one

second.

When turning off the power of the MRS-1044 and your

peripheral equipment, do so in the opposite order from

which you turned the power on.

1.

Turn off the power of your audio system (or turn

the volume all the way down).

2.

Press the rear panel [POWER] switch.

Normally, the project will automatically be saved on the

internal hard disk, and then the power will turn off. The

next time the power is turned on, the project that you were

last operating will be loaded automatically.

The demo songs have a protect setting that prevents the

data from being overwritten. For this reason, the project will

not be saved when you turn off the power after loading a

demo song.

• You must use this method to turn off the power of

the MRS-1044. If you tur n off the power by
disconnecting the AC adaptor plug from the [DC
12V] jack, or by unplugging the AC adaptor from
the AC power outlet, the project will not be saved,
and any previous recordings or changes will be
lost.

• In particular, you must never turn the power off by

unplugging the AC adaptor while the access
indicator of the display section is lit. Doing so may
damage the internal hard disk, causing all data to
be lost permanently.

Caution!

H

INT

Turn off the power

H

INT

H

INT

1

2

9/10

ZOOM MRS-1044

16

Listening

to
the

demo

songs

Listening to the demo songs

Advertising