Creating a new project (project new), Loading a project (project select) – Zoom MRS-1044 User Manual
Page 86
4.
Execute the operation (or change the setting) that
you selected.
For details on the procedure, refer to the sections that
follow.
5.
To return to the main screen, press the [EXIT] key
several times.
In the case of an operation that you execute, you will
automatically return to the main screen after execution.
You can select a project that was saved on the hard disk,
and load it. When the following screen is displayed, use the
dial to select the project that you want to load.
Press the [ENTER] key to load the project, or press the
[EXIT] key to cancel. After the project has been loaded,
you will return to the main screen.
• When you press the [ENTER] key, the project that you
had been working on will be saved automatically before
the selected project is loaded.
• When the power of the MRS-1044 is turned on, the
project that you were last working on will be loaded
automatically.
This operation creates a new project. To execute, press the
[ENTER] key when the following screen is displayed. To
cancel, press the [EXIT] key.
When you press the [ENTER] key, a new project will be
loaded, and you will return to the main screen.
• A newly created project will be automatically assigned a
default name of "PRJxxx" (xxx will be a project number in
the range of 000 – 999). You can edit this name as
desired.
• When you press the [ENTER] key, the project that you
had been working on will be saved automatically before
the new project is created.
This displays the size of the currently loaded project, the
available capacity of the internal hard disk, and the
remaining recording time. Use the cursor [
Q
]/[
W
] keys to
switch between the following display items.
●
REMAIN MB: This shows the remaining space on the
internal hard disk in MB (megabyte) units. (One
megabyte is 1,048,576 bytes.)
●
REMAIN h/m: The approximate recordable time
remaining for each track is shown in hours (h) / minutes
(m) / seconds.
●
PRJ SIZ MB: This shows the size of the currently
loaded project in MB (megabyte) units.
●
PRJ SIZ h/m: This shows the size of the currently
loaded project in terms of the recorded time per track, in
hours (h) and minutes (m).
Checking the project size / available
hard disk capacity (PROJECT SIZE)
H
INT
Number of the project
that will be newly created
Creating a new project (PROJECT
NEW)
H
INT
Project name
Project number
Loading a project (PROJECT SELECT)
H
INT
ZOOM MRS-1044
86
Refer
e
nce
[Pr
oject]
Project operations