3 defined values, 2 dte-dce character framing +icf, 1 description – Rainbow Electronics 900 User Manual
Page 143: 2 syntax, 2 dte-dce, Character framing +icf
FLYFOT-M260-MODULE
Page: 143 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
15.1.3 Defined
values:
<n> : range of auto-detectable speeds (bauds)
z
0
z
2400
z
4800
z
9600
z
19200
<m>: possible speeds that can be used by the DCE (bauds)
z
300
z
600
z
1200
z
38400
z
57600
z
115200
15.2 DTE-DCE character framing +ICF
15.2.1 Description
:
This command is used to determine the local serial port start-stop (asynchronous)
character framing used by the DCE.
15.2.2 Syntax :
Command syntax: AT+ICF= <format>[, <parity>]
Command
Possible responses
AT+ICF?
Note :
+ICF: 3,4
OK
Note : Current values
AT+ICF=?
Note :
+ICF: 3,4
OK
Note : Possible values
AT+ICF=3,4
Note :
OK
Note : New values
AT+ICF=3
OK
Note : New values
15.2.3 Defined
values:
<format>
0 : Autodetect (not supported)