Rainbow Electronics 900 - Manual (Page 190)

FLYFOT-M260-MODULE
Page: 190 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
18.22.3 Defined values
<melody>
0 : No melody (default)
1 - 10 : Melody 1 to 10
<player>
0 : Melody n°<melody> will be played on the buzzer for any new incoming voice call. (default)
1 : Melody n°<melody> will be played on the speaker for any new incoming voice call.
18.23 FLYFOT Software version +WSSW
18.23.1 Description :
This specific command displays some internal software reference.
18.23.2 Syntax :
Command syntax : AT+WSSW
18.23.3 Defined values :
No parameter
18.24 FLYFOT Custom Character Set +WCCS
18.24.1 Description :
This specific command allows to edit and display the custom character set tables. These tables are used
by the “CUSTOM” mode of +CSCS and the +WPCS commands. In this CUSTOM mode, when the user
enters a string, it is converted into GSM alphabet using the Custom To GSM table. In a similar way, when
the user requests a string display, the string is converted from GSM alphabet using the GSM To Custom
table.
In edition mode, the session is terminated by <ctrl-Z>, or aborted by <ESC>. Only hexadecimal
characters (‘0’…’9’, ‘A’…’F’) can be used. The number of characters entered must be equal to the edition
range requested, otherwise the command will return “+CME ERROR: 3”.
18.24.2 Syntax :
Command syntax : AT+WCCS=<mode>,<table>,<char 1>[,<char 2>]