Rainbow Electronics 900 - Manual (Page 228)

FLYFOT-M260-MODULE
Page: 228 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
18.51.3 5.18.3 Defined values :
<call type>
0 Incoming voice call
1 Incoming data call
2 Incoming fax call
<volume>
0 Min volume
…
6 Default volume
15 Max volume
<type>
0 Manufacturer Defined (default)
<index>
0 Stop Melody Playback
1-10 Melody ID for voice/data/fax call type (default : 1)
18.52 Ringer Sound Level +CRSL
18.52.1 Description :
This command is used to set/get the sound level of the ringer on incoming
calls. The set command changes the default <volume> value of the +CRMP
command.
18.52.2 Syntax :
Command syntax : AT+CRSL=<sound level>
Command
Possible responses
AT+CRSL=0
Note : Set volume to Min.
OK
Note : Current ring playing with Min.
volume.
AT+CRSL=15
Note : Set volume to Max.
OK
Note : Current ring playing with Max.
volume.
AT+CRSL=?
Note : supported parameters +CRSL: (0-15)
OK
18.52.3 Defined values :
<sound level>
0 Min volume
6 Default volume (default)
15 Max volume