Rainbow Electronics 900 - Manual (Page 207)

FLYFOT-M260-MODULE
Page: 207 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Note : Once a feature successfully enabled or disabled, the product needs to be reset to take the
modification into account.
18.35.2 Syntax
Command syntax AT+WCFM=<mode>,[<FtrMask>[,<Password>]]
Command Possible responses
AT+WCFM=0,”0A00” OK
Note : Disable some features
AT+WCFM=2 0000
Note : Display of the feature status OK
AT+WCFM=1,”0003”,”1234567890A OK
BCDEF1234567890ABCDEF12345678 Note : The features are enabled (the
90ABCDEF1234567890ABCDEF” password is correct)
Note : Enable features
AT+WCFM=1,”0050”,”1234567890A +CME ERROR: 3
BCDEF1234567890ABCDEF12345678 Note : Incorrect password
90ABCDEF1234567890FFFFFF”
Note : Enable features
18.35.3 Defined values
<mode>
0 : disable some features of <FtrMask>
1 : enable some features of <FtrMask>
2 : display the features state
<FtrMask> : features mask
16 bits hexadecimal string (4 characters from 0 (zero) to ‘F’)
<PassWord> : Password
256 bits hexadecimal string (64 characters from 0 (zero) to ‘F’)
18.36 FLYFOT Customer storage mirror +WMIR
18.36.1 Description
This specific command allows to make a mirror copy of the current configuration parameters in the
EEPROM. In case of memory problem for the storage, if a customer mirror already exists, this one
will be restored. Otherwise, the FLYFOT default mirrored parameters are restored.