Rainbow Electronics 900 - Manual (Page 165)

FLYFOT-M260-MODULE
Page: 165 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
17.10 AT+CIPHEAD
AT+CIPHEAD Set whether add a header to data received
Test command
AT+
CIPHEAD
=?
Response
+CIPHEAD:(0-NO HEADER,1-ADD HEADER)
OK
AT+CIPHEAD? Response
<mode>
OK
Parameter
See set command
AT+ CIPHEAD =<
mode >
Response
This command is used to add a header to data received from TCP/UDP
connection,distinguishing data received by other way such as SMS
OK,
ERROR
Parameter
<mode>
0 no header
1 set header,
Reference Note
The header format is “+IPD(data length):”
17.11 AT+CIPATS
AT+ CIPATS Set auto send timer
Test command
AT+
CIPATS
=?
Response
+CIPATS:(0-NOT AUTO SEND,1-AUTO SEND)
OK
AT+ CIPATS =
<mode>,<time> Parameter
<mode>
0 not set timer of sending data