Rainbow Electronics 900 - Manual (Page 79)

FLYFOT-M260-MODULE
Page: 79 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
9.10.2 Syntax :
Command syntax in PDU mode :
AT+CMGW= <length> [,<stat>] <CR>
give PDU<ctrl-Z / ESC>
Response syntax:
+CMGW: <index> or +CMS ERROR: <err> if writing fails
Command
Possible responses
AT+CMGW=.28.<CR>
0031000BA13105119226F40000AD0AA8C3F6
30885E9ED301 <ctrl-Z>
Note : Write a message in PDU mode +CMGW: 4
OK
Note : Message stored in index 4
AT+CMGW=? OK
AT+CMGW
AT+CMGW? +CMS ERROR: 3
Note: not supported.
9.10.3 Defined values :
None.
9.11 Send Message From Storage +CMSS
9.11.1 Description :
This command sends a message stored at location value <index>.
9.11.2 Syntax :
Command syntax: AT+CMSS=<index>[,<da> [,<toda>] ]
Response syntax:
+CMSS : <mr> or +CMS ERROR: <err> if sending fails
If a new recipient address <da> is given, it will be used instead of the one stored with the message.
Command
Possible responses
AT+CMGW=25<CR>
+CMSS: <mr>
OK
Note: Message stored with index 25 is send
successfully
AT+CMSS=5, 13901011234
Note : Send the message 5 to a different
destination number AT+CMSS:<mr>
OK
Note : Successful transmission