Rainbow Electronics 900 - Manual (Page 146)

FLYFOT-M260-MODULE
Page: 146 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
15.4 Set DCD signal &C
15.4.1 Description :
This commands controls the Data Carrier Detect (DCD) signal.
15.4.2 Syntax :
Command syntax : AT&C<n>
Command
Possible responses
AT&C0
Note : DCD always on OK
Note : Command valid
AT&C1
Note : DCD matches state of the remote
modem’s data carrier OK
Note : Command valid
15.4.3 Defined values:
<n>
0 : DCD always on
1 : DCD matches state of the remote modem’s data carrier