16 data / commands multiplexing +wmux, 1 description, 2 syntax – Rainbow Electronics 900 User Manual

Page 154: 3 defined values, 17 request identification information i, Data / commands multiplexing +wmux, 17 request, Identification information i

Advertising
background image

FLYFOT-M260-MODULE

Page: 154 / 239

This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.

15.16 Data / Commands Multiplexing +WMUX

15.16.1 Description

This specific command allows to manage the data / AT commands multiplexing mode. See appendix
18.7 for the Data / Commands multiplexing protocol description.

15.16.2 Syntax

Command syntax AT+WMUX=<mode>
Command

Possible responses

AT+WMUX=?

+WMUX: (0-1)
OK

AT+WMUX?


+WMUX: 0
OK
Note : Data / Commands multiplexing
disabled.

AT+WMUX=1
Note : Enable Data / Commands multiplexing.

OK

15.16.3 Defined values

<mode>

0: Multiplexing disabled. When the product is online (data communication in progress), no AT command
can be used (default).

1: Multiplexing enabled. Data flows and AT commands are multiplexed while in online mode (data
communication in progress).

15.17 Request identification information I

15.17.1 Description :

This command causes the product to transmit one or more lines of specific information text.

15.17.2 Syntax :

Command syntax : ATI<n>
Command

Possible responses

ATI0
Note : Manufacturer and model
identifications

FLYFOT MODEM
MULTIBAND 900 1800
OK
Note : GSM 900 MHz primary band

ATI3 Note : Revision identification

FLYFOT M260-VER-01.00 Aug 12 2006

Advertising