3 defined values – Rainbow Electronics 900 User Manual
Page 69
FLYFOT-M260-MODULE
Page: 69 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Command
Possible responses
AT+WPCS=”TRANSPARENT”
Note : Transparent mode
OK
Note : Command valid
AT+WPCS=?
Note : Get possible values
+WPCS:
("TRANSPARENT","HEX")
OK
Note : Possible values
AT+WPCS?
Note : Get current value
+WPCS: "TRANSPARENT"
Note : read current value
AT+WPCS
+CME ERROR: 3
Note: The product can not support this command
8.8.3 Defined
values
:
<Character Set>
“TRANSPARENT”: Transparent mode. The strings are displayed and entered as they are stored in SIM.
“HEX”: Hexadecimal mode. No character set used; the user can read or write hexadecimal values.