3 defined values, 25 flyfot lock +wlck, 1 description – Rainbow Electronics 900 User Manual
Page 191: Flyfot lock +wlck

FLYFOT-M260-MODULE
Page: 191 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Command
Possible responses
AT+WCCS=0,0,120,130
+WCCS: 11,
Note : Display from character 120 to
78797A2020202020097E05
character 130 of the Custom To GSM
OK
conversion table
Note : 11characters displayed
AT+WCCS=1,0,115<CR>
OK
20<ctrl-Z>
Note : Edition successful
Note : Edit character 115 of the Custom To
GSM conversion table
AT+WCCS=1,1,0,4<CR>
OK
40A324A5E8<ctrl-Z>
Note : Edition successful
Note : Edit the 5 first characters of the
GSM To Custom conversion table
AT+WCCS=1,1,200
+CME ERROR: 3
Note : Edit character 200 of GSM To
Note : Index out of range
Custom conversion table
18.24.3 Defined values
<mode>
0 : Display the table
1 : Edit the table
<table>
0 : Custom To GSM conversion table
1 : GSM To Custom conversion table
<char 1>, <char 2> : Character range to display/edit.
0-127 : for GSM To Custom conversion table
0-255 : for Custom To GSM conversion table
Note : If only <char 1> is provided, only this char is displayed/edited.
See section 19.2 for informative examples on phonebooks.
18.25 FLYFOT LoCK +WLCK
18.25.1 Description :
This specific command allows the ME to be locked on a specific network operator.
Note: Test SIM cards (with MCC=001 & MNC=01) doesn’t check these locks.