Rainbow Electronics 900 - Manual (Page 70)

FLYFOT-M260-MODULE
Page: 70 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
9 Short Messages commands
Note: At present, M260 only support “SM” storage.
9.1 Parameters definition
<da>
Destination Address, coded like GSM 03.40 TP-DA
<dcs>
Data Coding Scheme, coded like in document [5].
<dt>
Discharge Time in string format :
“yy/MM/dd,hh:mm:ss±zz”(Year [00-99], Month [01-12],
Day [01-31], Hour, Minute, Second and Time Zone [quarters of an hour] )
<fo>
First Byte, coded like SMS-SUBMIT first byte in document [4],
Default value is 17 for SMS-SUBMIT
<index> Place of storage in memory.
<length> PDU mode (+CMGF=0): length of the TP data unit in bytes
<mem1> Memory used to list, read and delete messages (+CMGL, +CMGR and +CMGD).
<mem2> Memory used to write and send messages (+CMGW, +CMSS).
<mid> CBM Message Identifier.
<mr> Message Reference.
<oa>
Originator Address.
<pid> Protocol Identifier.
<pdu> For SMS : GSM 04.11 SC address followed by GSM 03.40 TPDU in hexadecimal format,
coded as specified in doc [4] For CBS : GSM 03.41 TPDU in hexadecimal format
<ra>
Recipient Address.
<sca> Service
Center Address
<scts>
Service Center Time Stamp in string format :
“yy/MM/dd,hh :mm :ss±zz”
(Year/Month/Day,Hour:Min:Seconds±TimeZone)
<sn> CBM Serial Number
<st> Status of a SMS-STATUS-REPORT
<stat> Status of message in memory.
<tooa> Type-of-Address of <oa>.
<tora> Type-of-Address of <ra>.
<tosca> Type-of-Address of <sca>.
<total1> Number of message locations in <mem1>.
<total2> Number of messages locations in <mem2.
<used1> Total number of messages locations in <mem1>.
<used2> Total number of messages locations in <mem2.
<vp> Validity Period of the short message, default value is 167