Rainbow Electronics 900 - Manual (Page 42)

FLYFOT-M260-MODULE
Page: 42 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
AT+ TMAS?
+TMAS: 1
OK
Note: Get current value
AT+ TMAS =?
+TMAS: (0,1)
OK
Note: Current reorders’ number
AT+ TMAS
+CME ERROR 3
Note: not support
5.19.3 Defined values:
<m>
1: Enable minute alarm
0: Disable minute alarm
5.20 FLYFOT Speaker & Microphone selection +TFSPEAKER
5.20.1 Description:
This specific command is used to select the speaker and the microphone set.
5.20.2 Syntax:
Command syntax: AT+TFSPEAKER=<ActiveSpkMic>
Command
Possible responses
AT+TFSPEAKER=0
Note: receiver OK
Note: Command valid
AT+TFSPEAKER=1
Note: headset OK
Note: Command valid
AT+TFSPEAKER=2
Note: hand free OK
Note: Command valid
AT+TFSPEAKER?
+SPEAKER: 0
OK
Note: receiver are active
AT+TFSPEAKER=?
+SPEAKER: (0-2)
OK
5.20.3 Defined values:
<ActiveSpkMic>
0: earphone and aux MIC
1: receiver and main MIC
2: hand free and main MIC