Xylem photoLab 6600 UV-VIS - Manual (Page 103)

photoLab
®
6600 UV-VIS Operation
103 ba75848e01 08/2009
For each export procedure you can select the location where the PC-
readable files (*.csv) should be stored: either the photometer (Internal DataB
folder) or an external memory (USB memory).
The files stored in the photometer (Internal DataB folder) can later be
transferred to a connected PC or to an external memory (USB memory).
You can transfer to a USB memory device either individual files with
measurement data or all files stored in the internal Internal DataB folder.
z Individual files (see section 4.12.1)
z All files (see section 4.12.2)
Measurement data Save, back up, export
Concentration,
Absorbance / %
Transmission
Multi wavelengths
Measurement datasets of these measuring
modes are first stored in the measured value
memory of the photometer (1000 memory
locations) with <STORE> or AutoStore.
The measured value memory is available
from the Measurement data memory menu.
Here you can view, filter and export into a PC-
readable file (*.csv) the stored measurement
datasets (<STORE>).
Csv files of these measuring modes cannot
be reimported to the photometer.
Spectrum
Kinetics
You can store and export measurement data
of these measuring modes directly as a PC-
readable file (*.csv) with <STORE>.
Csv files of these measuring modes can be
reimported and displayed on the photometer.
AQA records You can store and export measurement data
of these measuring modes directly as a PC-
readable file (*.csv) with <STORE>.
Csv files of records cannot be reimported to
the photometer.