Xylem photoLab 6600 UV-VIS - Manual (Page 82)

Operation photoLab
®
6600 UV-VIS
82 ba75848e01 08/2009
Recording the baseline:
4 Press the <ZERO·BLANK> key.
The photometer records the
baseline.
5 Wait until the baseline is
completely recorded.
The photometer is ready to
measure after the baseline has
been recorded.
Recording the spectrum:
6 Depending on the type, insert the
cell as follows:
Round cell:
Insert the round cell in the round
cell shaft so it touches the bottom.
7 Close the inner turn-up lid.
8 Start the measurement with
<START·ENTER>.
After the spectrum has been
recorded, the following message
appears: Recording of spectrum is
completed.
Spectrum 04/16/07 9:52
Wavelength [nm]
Ab
so
rb
anc
e
Spectrum 04/16/07 9:52
Wavelength [nm]
Setup Open
Ab
so
rb
an
ce
Spectrum
Start measurement with <Start/Enter>
inner
turn-up lid