Xylem photoLab 6600 UV-VIS - Manual (Page 152)

Maintenance and cleaning photoLab
®
6600 UV-VIS
152 ba75848e01 08/2009
5.2 Cleaning
Caution
The housing components are made out of synthetic materials (ABS,
PMMA and PC). Thus, avoid contact with acetone, ethyl alcohol and
similar detergents that contain solvents. Any splashes must be wiped
off immediately.
Clean your photometer as follows:
z If the housing surface is dirty, wipe it with a soft cloth and mild soapy water.
z Remove any chemicals splashes as soon as possible.
z For disinfection, you can use isopropanol for cleaning for a short time.