Xylem photoLab 6600 UV-VIS - Manual (Page 109)

photoLab
®
6600 UV-VIS Operation
109 ba75848e01 08/2009
4.11.7 Filtering measurement datasets
The functions to display, delete and download stored measurement datasets
refer to all stored measurement datasets that correspond to the specified
filter criteria.
Filter criteria The following filter criteria can be set:
z Mode (measured parameter)
z User
z ID (identification)
z Date (date from ... to ...)
z Method (for the measured parameters, Concentration and Multi
wavelength)
The filter setting menu is
displayed.
1 Set the filter criteria.
2 If necessary, deactivate any
selected filter criteria with [Reset
entry].
3 Confirm the filter selection with
[Apply].
The Measurement data memory
list is displayed.
The following information is
displayed additionally:
- Current memory occupancy
- Active filter criteria (Filter
✓)
<HOME>
Concentration,
Absorbance / % Transmission, or
Multi wavelengths
– [Setup]
– Measurement data
memory
– Setup
– Filter
Filter
– Mode (Concentration, etc.)
– User (<A...9>)
– ID (<A...9>)
– Date (from ... to ...)
– Method
Measurement data memory 04/16/07 9:52
27.03.07 14:00 3.50 mg/l Ni Administrator AutoStore
27.03.07 14:05 3.64 mg/l Ni Administrator AutoStore
27.03.07 14:10 3.69 mg/l Ni Administrator AutoStore
27.03.07 14:15 3.72 mg/l Ni Administrator AutoStore
27.03.07 14:20 3.72 mg/l Ni Administrator AutoStore
27.03.07 14:25 3.75 mg/l Ni Administrator AutoStore
27.03.07 14:30 3.73 mg/l Ni Administrator AutoStore
27.03.07 14:35 3.80 mg/l Ni Administrator AutoStore
27.03.07 14:40 3.78 mg/l Ni Administrator AutoStore
Filter
Memory allocation: 9/1000
Setup Single value Delete