Xylem photoLab 6600 UV-VIS - Manual (Page 144)

Operation photoLab
®
6600 UV-VIS
144 ba75848e01 08/2009
4.16 Reset
You can reset (initialize) the measurement settings or all settings.
Note
The Reset function is available for users of the user group, Administrator
only.
You have the following options of resetting the photometer settings:
z Reset configuration All settings except for the
measurement data memory, user-
defined methods and measured
blank values are deleted.
z Delivery condition All settings (including measurement
data memory and user-defined
methods) are deleted and the
photometer is reset to the delivery
condition.
The menu where to select the
reset type (Delivery condition /
Reset configuration) is displayed.
1 Select and confirm the reset type.
The reset is carried out.
<HOME>
[General setup]
– Reset