Alpha Technologies AMP24 HP User Manual
Page 101
99
Doc. #: 0260011-J0 Rev B
;829;
;228.DIG INP2 FAILURE;
;0; ; ;
x
Type of alarms for Digital inlet 2 (Inlet to be configured by user)
;830;
;229.REDUNDANCY LOST;
;1; ; ;
x
Activates when redundancy is lost
;831;
;230.REDUND + 1 LOST;
;2; ; ;
x
Activates when more than # of modules of redundancy are lost
;832;
;231.SYS SATURATED;
;1; ; ;
x
Type of alarms when the threshold of pre-alarm “overload” is exceeded
;833;
;232.MAIN SOURCE LOST;
;2; ; ;
x
Type of alarm when Main source is lost
x
In AIM2500 mode : Main source is ACin = Network
x
In ON LINE mode : Main source is DCin = battery
;834;
;233.SEC SOURCE LOST;
;1; ; ;
x
Activates when Secondary source is lost
x
In AC/AC mode : Secondary Source is DCin = battery
x
In ON LINE mode : Secondary Source is ACin = Network
;835;
;234.T2S BUS FAIL;
;2; ; ;
x
Activates when the T2S is lost
;836;
;235.T2S FAILURE;
;2; ; ;
x
Activates when the T2S is not running
;843;
;242.LOG NEARLY FULL;
;0; ; ;
x
Activates when the logfile is nearly full