Hach-Lange DR 2800 eco - Manual (Page 18)

16
Installation
3.6 Interfaces
The DR 2800/DR 2800 eco has two USB interfaces as a standard
feature. They are located on the back wall of the instrument. These
USB interfaces enable data and graphics to be output to a Printer
and a PC and updated (see
6.6.2 Upgrading the Instrument
Software on page 101 ).
Note: Data can only be transferred to a PC with the help of the optional
Hach Data Trans software (Cat. No: LZY274).
Figure 2 Interfaces
1 On/Off switch 3 Plug in power supply
2 USB for PC (USB type B) 4 USB for Printer, Keyboard, USB Memory (USB type A)