Hach-Lange DR 2800 eco - Manual (Page 40)

38
Standard Operations
5.3 Storing, Recalling, Sending and Deleting Data
5.3.1 The Data Log
The DR 2800 Data Log will store up to 500 readings taken in the
modes: Stored Programs, Barcode Programs, User Programs,
Favorite Programs, Single Wavelength and Multi Wavelength. A
complete record of the analysis is stored, including the Date, Time,
Results, Sample ID, and Operator ID.
The DR 2800 eco data log will store up to 200 readings taken in the
Barcode Programs.
5.3.1.1 Auto/Manual Data Storage
The data storage parameter indicates whether data are to be stored
automatically or manually (in which case the user has to decide
which data to store).
1. Press Store: On/Off in the ”Options“ menu.
• With the Store On setting, all measurement data are stored
automatically.
• With the Store Off setting, no measurement data are
stored. However, this setting can be changed to Store On
in the result display via Configuration. The reading
currently shown in the display is then stored.
Note: When the instrument's memory (data log) is full, the oldest data are
automatically deleted allowing the new data to be stored.
5.3.1.2 Recalling Stored Data from the Data Log
1. Press Recall Data from the ”Main Menu“.
2. Press Data Log.
A listing of the stored data is displayed.
3. Press Filter: On/Off.