1 installing the cell adapter (dr 2800 only) – Hach-Lange DR 2800 eco User Manual
Page 22
Advertising
20
Installation
3.7.1 Installing the cell adapter (DR 2800 only)
1.
Open the cell compartment.
2.
Select the correct cuvette/cell adapter for your cuvette type.
3.
Insert the adapter so that the arrow on it points to the left and
you can read the imprint of the cuvette type on the cuvette/cell
adapter.
Note: The arrow on the adapter indicates the direction of the beam path.
Figure 7 Installing a cuvette/cell adapter
Advertising
This manual is related to the following products: