Hach-Lange DR 2800 eco - Manual (Page 32)

30
Standard Operations
5. The display shows the chosen Operator ID.
6. Press OK. The instrument will return to the ”Instrument Setup“
screen and show the selected operator identifier.
7. Operator ID is activated.
Note: Press Delete to remove an Operator ID from the list.
Note: Alternatively, you can enter or change an Operator ID in
measurement mode. In the results screen, press Options, More... and
then Instrument Setup, or if an Operator ID is already assigned, select the
"Operator ID” symbol immediately in the results screen.
5.2.2 Sample ID
Use this option to enter up to 30 Sample IDentification tags (up to
13 characters each) into the instrument. You may want to use this
to specify the sample.
1. Press Sample ID on the ”Instrument Setup“ screen.
2. Press New to enter a new ”Sample ID“.
3. Use the alphanumeric keypad to enter a new Sample ID.
Note: Use the alphanumeric keypad to enter a new Sample ID. You cannot
use spaces in this function. Use underscore symbols instead (on the key
YZ_).
4. Press OK to confirm.