Hach-Lange DR 2800 eco - Manual (Page 68)

66
Advanced Operations
6.1.1 Programming a user method
1. Select New in the ”Program Options“ menu.
All input steps and their significance and options are explained in
the following.
Program Number:
Specific test number, with which the program can subsequently be
called up from the selection list in the User Programs menu or the
Favorites menu.
2. Use the alphanumeric keypad to enter a program number
between 950 and 999. The lowest available number appears
automatically.
3. Press OK.
Note: If the program number is already assigned to another user
program, a message appears, asking whether the existing program
should be replaced. If you press OK, the existing program will be
overwritten.
Program Name:
4. Use the alphanumeric keypad to enter a program name. The
name can be a maximum of 28 characters long.
5. Press Back to go back to the previous program point or press
Next to continue with the input of the program data.
Table 8 Program options ”User Programs“
Options Description
New
select New when you want to program a new user program.
Note: The first time Program Options is selected, only the New option is available. The other
options remain inactive (gray) until the first program has been created.
Add to favorites to select Add to favorites to add a user program to the list of favorites
Edit to select Edit to modify an existing program
Delete
to select Delete to remove a program from the list of user programs.
Note: If this program is also in the list of favorites, it will be deleted from this, too.