Hach-Lange DR 2800 eco - Manual (Page 31)

29
Standard Operations
5.2 Instrument Setup Mode
1. Select Instrument Setup in the ”Main Menu“.
A selection of functions appears in order to configure the functions
of the instrument.
5.2.1 Operator ID
Use this option to enter up to 30 sets of operator initials (up to five
characters each) into the instrument. The Operator ID can be
assigned to a measurement from the measurement screen or the
”Operator ID“ menu. This feature helps record which operator
measured each sample.
1. Press Operator ID in the ”Instrument Setup“.
2. Press New to enter a new ”Operator ID“.
3. Use the alphanumeric keypad to enter a new Operator ID.
Note: You cannot use spaces in this function. Use underscore
symbols instead (on the key YZ_).
4. Press OK to confirm.
Table 3 ”Main Menu“ Options DR 2800 eco
Option Function
Barcode Programs
(HACH LANGE
Programs) Barcode programs (Appendix B) are pre-programmed methods that make use of LANGE cuvette
tests. The working procedures for LANGE tests are included in the test packs.
System Checks
The system checks menu offers a number of options, including optical checks, output checks,
lamp history and instrument update.
Recall Data Stored data can be called up, filtered, transmitted and deleted.
Instrument Setup
In this mode, user-specific or method-specific settings can be entered: Operator-ID, Sample-ID,
Date & Time, Display & Sound, PC & Printer and Password.