6 pc und drucker, Standard operations – Hach-Lange DR 2800 eco User Manual
Page 35
33
Standard Operations
3.
Select one of the options under Auto off to set the length of the
idle period that can elapse before the instrument automatically
switches off.
Note: After the instrument switches itself off automatically, you have to
press the push-button switch on the back of the instrument to start it
again.
5.2.6 PC und Drucker
The DR 2800/DR 2800 eco series is provided with 2 USB
interfaces, which are located on the back of the instrument (see
Figure 2 Interfaces on page 16
). These interfaces can be used to
output data and graphics to printers, to update data, and to transfer
data to a PC. A USB memory stick is used to update data, see
Upgrading the Instrument Software on page 101
.
Important Note: A USB cable must not be longer than 3 m!
1.
Press PC & Printer on the ”Instrument Setup“ screen.
A list with information about the connections opens.
Table 4 USB Connector
USB Interfaces
Description
USB (Type B)
This USB port can be used to connect a PC to the DR 2800/DR 2800 eco.
USB (Type A)
This USB port can be used to connect a printer, a USB memory stick and keyboard.