Hach-Lange DR 2800 eco - Manual (Page 33)

31
Standard Operations
5. If you want to number the Sample-IDs sequentially (e.g. Inflow
(01... etc.)), activate Add Number.
• Use the arrow keys to specify the first number of the sequence.
• Use the key between the arrow keys to enter the first number of
the sequence directly via the alphanumeric keypad.
6. Press OK to return to the "Instrument Setup" menu.
7. The Sample-ID is activated. Each Sample-ID is automatically
numbered in ascending order after a measurement. The
number is shown in parentheses behind the Sample-ID.
Note: Press Delete to remove a Sample ID from the list.
Note: Alternatively, you can enter or change an Sample ID in measurement
mode. In the results screen, press Options, More... and then Instrument
Setup, or if an Sample ID is already assigned, select the "Sample ID”
symbol immediately in the results screen.
5.2.3 Date and Time
1. Press Date & Time on the ”Instrument Setup“ screen.
2. The date and time are subdivided over a number of fields.
Press the appropriate field and use the arrow keys to change
the value.
3. Press OK to confirm. The instrument will return to the
”Instrument Setup“ screen.