2 editing/deleting of barcode-readable appliaction, Standard operations – Hach-Lange DR 2800 eco User Manual
Page 65
63
Standard Operations
5.5.8.1 Evaluation of barcode-readable appliaction with LCW 906
1.
Insert the Light Shield.
2.
The instrument need to be at Barcode Programs in the ”Main
Menu“.
3.
Insert the cuvette LCW 906.
4.
If you have programmed more than one of your own
applications under 906, select the required application from the
displayed list and press Start.
Note: Press Start Permanent if this application 906 is to apply to all
subsequent measurements.
To disable the function Start permanent:
Insert the cuvette LCW 906 and close cell compartment. Press
Options, More... and Permanent On.
5.5.8.2 Editing/Deleting of barcode-readable appliaction
Edit:
1.
Press Stored Programs in the ”Main Menu“ and select a
program.
a.
Press Program Options and then Edit.
b. Insert the LCW 906 cuvette, press Options, More... and
then Edit.
2.
The Data list of the corresponding application will appear.
3.
Activate the corresponding line in the data overview and press
Edit.
General advices regarding the programming respectively updating
of program datal, see
5.5.6 Updating/Editing LANGE Barcode
and
6.1.3 "Free programming" program
.