Hach-Lange DR 2800 eco - Manual (Page 78)

76
Advanced Operations
6.1.3.2 Entering a new element of a measuring sequence
1. Activate the Measurement Process line in the data overview
and press Edit.
2. Press Edit again and then New.
Content and definition of the keys
[Z] key / Zeroing
1. Press the [Z] key to program a zero measurement. Confirm
with OK.
2. Press New and then Zeroing... and use the alphanumeric
keypad to enter the wavelength at which the zero measurement
is to be carried out. Press OK and confirm your input by
pressing OK again.
3. If zero measurements are to be carried out at a number of
wavelengths, repeat the above two steps for each wavelength.
Note: The entered measurement sequence is displayed.
Timer key
1. Press the Timer key to enter any waiting, reaction or handling
times that have to be taken into account. Use the alphanumeric
keypad to enter the time. Press OK and confirm your input by
pressing OK again.
Note: This time is integrated into the measurement process.
Note: The entered measurement sequence is displayed.