Luminex 100 User Manual Version 1.7 - Manual (Page 18)

Luminex 100 User Manual Version 1.7 x MAP Technology
2 - 2 PN 89-00002-00-063 Rev. A
Warnings and Notes
Informational notes and warnings may appear in this manual.
Note: A note provides general helpful information. No safety or
performance issues are involved.
Caution: This message is used in cases where the hazard is minor or
only potential hazard is present. Failure to comply with the caution
may result in potentially hazardous conditions.
Warning: This message is used in cases where danger to the
operator or to the performance of the instrument is present. Failure to
comply with the warning may result in incorrect performance,
instrument failure, invalid results, or hazard to the operator.
Danger: This message is used in cases where significant risk of
serious injury or death is present.
Safety Precautions
Please read the following safety information before setting up or
using the Luminex 100 system. A user should always be present
during system operation. This system contains electrical, mechanical,
and laser components which, if handled improperly, are potentially
harmful. In addition, biological hazards may be present during
Luminex 100 analyzer operation. Therefore, Luminex Corporation
recommends that all Luminex 100 analyzer users become familiar
4 Off
5 Warning (see manual).
6 Warning (see manual).
7 Warning (see manual).
8 Warning (see manual).
9 Warning (see manual).
10 Warning (refer to manual)
Symbol Description