Luminex 100 User Manual Version 1.7 - Manual (Page 51)

PN 89-00002-00-063 Rev. A 6 - 1
Data Acquisition
The Luminex 100 analyzer uses Luminex Data Collector software to
acquire data. This chapter describes the following topics:
• Options
• Sessions
• Templates
• Multiplex Acquisition
• Data Collection
• Reports
Options
Before you can acquire data, you must set up some of the different
options available. Click Options on the toolbar to open the Options
dialog box. The Options dialog box has these tabs: User, Acquisition,
Advanced, Setup XY, and Info. These options apply to all sessions.
User tab
This tab has controls to set preferences for how the system works.
Figure 6-1. Options Dialog Box - User Tab
6