Luminex 100 User Manual Version 1.7 - Manual (Page 27)

x MAP Technology System Overview
PN 89-00002-00-063 Rev. A 3 - 3
Laser
• Reporter laser: 532 nm, nominal output 10-16.5 mW, maximum
500 mW, frequency-doubled diode; mode of operation mW,
continuous wave (CW)
• Classification laser: 635 nm, nominal output 9.1 mW ± 6%,
maximum output 25 mW, diode; mode of operation, continuous
wave (CW)
Fluidics
• Sheath flow rate: 90 µL/second ± 5 µL/second
• Cuvette: 200 micron square flow channel
• Sample injection rates: 60 µL/minute, 45 µL/minute, or 30 µL/
minute
• Sample uptake volume: 10-200 µL
Electronics
• Reporter channel detection: photomultiplier tube,
A/D resolution, 14 bits
• Classification and doublet discriminator channel detection:
avalanche photo diodes (APD) with temperature
compensation, A/D resolution 12 bits
• Communications interface: RS 232
Signal Processing
• Signal modes: linear, with logarithmic or linear display option
PC
• Computer: a Pentium III microprocessor or equivalent class PC,
minimum speed 933 MHz
• Main memory: minimum of 128 MB
• Hard disk drive: 10 GB minimum storage capacity
• Communications, serial ports: minimum of 2 RS-232 compatible
serial ports
• Operating system support: MS Windows ®
• CE marked and UL listed
• Two-button mouse or equivalent
• Monitor: minimum of 17-inch diagonal monitor
• Keyboard: a 104-key keyboard or equivalent
• Power cords for the US and Canada are included in the system.
Power cords for other countries must be ordered separately.
• Power: 115-230 V~, Maximum 6.0 Amps, 50-60 Hz