Luminex 100 User Manual Version 1.7 - Manual (Page 71)

x MAP Technology Data Acquisition
PN 89-00002-00-063 Rev. A 6 - 21
density is indicated by contrasting colors. A decaying dot plot shows
the 100 most recent events acquired by the Luminex 100 analyzer.
Figure 6-26. Dot Plot Display
In the upper right corner of the frame, four buttons let you control the
display:
Count/Result: Switches the display between count and
result. This is either a count of the number of events
collected for the bead ID, or an RP1 intensity result. The
result is the median value for the events.
Switch to Dot Plot: Switches the display between the
bar graph and dot plot.
Show all: Shows the bead IDs (001, 002, 003, ...100
instead of 010, 020, 030, ...100). The Maximize button
makes the display easier to read.
Zoom: Enlarges a specific area on the display.
Lin/Log: Switches the dot plot display between a linear
and logarithmic view.
Maximize/minimize: Enlarges the entire histogram
frame, or returns it to its smaller size.
Bead details. You can view information about a specific bead set
by clicking the bar for that bead set, or by clicking the Y axis
position for that bead set. This brings up a Bead details dialog box
for that specific bead ID, showing the bead ID, the bead name, and
the count (number of events for that bead). A density plot shows how